For a long time ago, I am trying really hard to identify and find the proper way formulate the reasons why I am pursuing film photography. My opinion has changed during the years quite drastically and I went through many stages. If I want to be honest I have started up because it was the only way I could afford to go with bigger “sensor” sizes and thus achieve bokeh.
Later I turned towards the typically listed reasons such as slowing down, being more disciplined and make every frame count. I was also and to some extent still is a big believer of the film look and the superiority of quality of film over digital. But as digital technology as well as the corresponding software environment matured I have had harder and harder time convince myself that these arguments stand if they are closely inspected.
The film look can be emulated so good that I have hard time to tell the difference between some of my own experimental film filtered digital and actual film photo pairs. The quality argument in strictly technical terms has melted away to me unless one uses really big formats. Even worse there are plentiful situations where digital is unquestionably excels for examples when extreme high sensitivity is needed.
One can be disciplined with a digital camera in hand as well. A memory card with just little space on it can simulate the limiting factor of roll sizes, and nothing stops us not to look at the screen every time the shutter was released.
I was really questioning all the effort, time and money I have put into equipment, film, darkroom material and software into film photography. Should I keep doing this or it would be the best to write off all the losses and switch completely to digital once and for all? I had to let this question sit on a hidden shelf for quite some time somewhere in my mind. I think I have my answer now and I am eager to share. Maybe I am not alone with my reasons.
The answer is not quite straight forward. It is an evil mixture of deep psychological hooks on my personality spiced up with a good amount of nostalgia and a tiny bit of snobbism. The trivial part is that I enjoy to handle nice, well made vintage cameras and lenses. They are built to last and most of them even have quite a bit of a history. I think I also have an anti-consumerist side which grasps for the concept of a simpler world where one does not feel the need to change camera body and even brand every second year. I adore my carefully selected gear and I am now very reluctant to change it for the next big thing from the universe of gadgets.
The not so trivial part starts with the limitation factor on choices. If I use a certain type of film, I can technically do countless things with it especially because I use a hybrid workflow which involves digital processing. But a digital raw file with a library of Lightroom filters in hand is just a bigger set of infinite. This could lead to paralysis via choices. Here is a brilliant Ted talk by Barry Schwartz about this topic. I need to accept the inherited characteristics of the material rather than trying to define it. I am very happy with the aesthetics I get from my favorite film stocks, but I have hard time to be able to decide which filter to use when I start out with a digital file.
Of course there is also the fact that to get from the decisive moment to a print or even to a digital file, there is a lot of work involved. Prepare, shoot, make notes, develop,make notes again, scan, process digitally, catalog, select in multiple rounds, archive, print, publish online. All these steps require me to be fully present and put myself into the process. Every stage involves different skills, a lot patience and of course anything could go wrong at any given time especially with the chemicals. Because of this long and delicate process I learn to care more about the photos. Eventually I program myself to like the end results because I have to wait (sometimes months long) to get to see them.
Each and every shoot which survives my process is special for me even though they are not perfect. They have personality and I remember them all. I could mostly tell what film and camera I used even without checking the notes. They reflect a stage on my self-seeking journey, a snapshot of the way I approached a subject and the process at a given point in time. All of these factors together shape the reason why I stick to film.
Of course there are numerous things which I don’t necessarily like about film. While I enjoy working in the darkroom, I am not very happy to get in contact with dangerous chemicals. Working with old equipment means that occasionally they give up, leaving you with nothing but bitter disappointment instead of nice photographs.
This is a high risk high reward game I seem to enjoy. I would certainly think different if I would practice photography for living and not only for fun. In any case, I stop struggling for finding better answers for now. There are still many reasons I have not listed now like working with tactile physical materials or the element of surprise as the process cannot be fully controlled. But I know enough to let this question go and I will keep focusing on the actual act of shooting film rather than analyzing the motivations behind.
Light quality is extremely important to a photographer, just like snow for an Inuit. We have countless names for the different types of light while any average people would only call them “strong” or “weak”. The amount of light we get is very easy to measure and describe. But the quality is a far more subtle, much harder to formalize concept and therefore much more interesting to me. Modern cameras can handle low light extremely well thus photography is now possible under such difficult circumstances no one could be foreseen just until a few years before. But high sensitivity sensors with great quantum efficiency and extremely sophisticated noise reduction processing cannot create great photographs just by extending the lower bound of minimum illumination necessary to capture an image. Although these new tools certainly aid the photographing process, the quality of light (among other factors) is and always will be key to a good image.
I am currently experimenting with mainly available light, trying to find situations which work for me so I can get the results I like in a somewhat predictable manner. One of my favorite spots lately is the door of our balcony. In my opinion, this location has nearly ideal light conditions for portraits during most of the day. The balcony is relatively deep, and only the front is open (sides are solid walls), then comes the big door followed by a deep room with white walls and furniture.
This setup has a similar effect to a soft-box. Light comes through in a beautiful evenly distributed, soft way, which then decays rapidly as it penetrates into the room. A subject placed close to the door can be lit very well with a strongly directional but soft light while the background is lost in darkness.
I have taken several portraits at this place using different formats (APS-C, 35mm, 6x6cm), films and digital sensors, and a small, but representative selection can be seen in this post. I think it is interesting to see next to each other similar shoots using similar focal length but with vastly different capturing technology.
The conclusion is that, no matter what your medium is, good light (and composition) could always give respectable results but technology does not save the day if the light quality is poor for the subject. But it is again another subjective property, what is poor light for a photographer for a given purpose, could be magnificent for another. Nevertheless, I think it is crucial to study light as a photographer, amateurs and professionals alike.
Walls are usually not the most exciting subjects to photograph. To use medium format slide film to do that is even more strange and could be considered as some sort of crime by some. After all, we live in a time when both film and labs which are able to develop slides are more and more scare.
But what if you’ve found some really awesome walls filled with stunning graffiti masterpieces varying in size up to 30 meters (my approximation) and the whole place is a partly abandoned industrial complex.
Well, I couldn’t resist and loaded my Pentacon Six with a roll of expired (in 2004) Kodak Ektachrome 64 and headed to this place with my wife to take pictures of walls. In fact, she took way better photos than me, so maybe I will post those in the future as well.
I usually have no problems with expired film stocks, but this roll of Ektachrome gave me a very interesting result. When it came back from development it was possibly the flattest looking positive I have ever seen. I thought that I majorly overexposed all the frames equally. Surprisingly after scanning, I had to realize that almost no highlights were blown away and I could recover many details and color information during post-processing. I have the impression that the last 10 years after the end of the expiry date of the film was not spent in a refrigerator. I still have 4 rolls of the same batch of film, I need to think it over if I want to give them a second try.
The place we found hosted the Livin’ Streets 2014 festival for urban art, graffiti & street art between 07.06-18.07 2014. Their facebook page is here. Although we were too late to see the actual event, we could still meet with one of the artists who stayed to finish his work and also we could see all the paintings in the finished form. It was a great experience and we had a lot of fun, so yes it is totally fine to shoot some walls from time to time.
The photos were taken by my Pentacon Six Tl using a Carl Zeiss Jena Flektagon 50mm and in some cases a Biometar 80mm. The film was developed by a local shop and scanned by me with a CanoScan 9900F.
Finally, the Sun has returned to us and days are once again long enough for me to have a chance to enjoy the light even after working hours.
To celebrate this blessing I have finished shooting the roll of Velvia which I have started last October and now sharing with you. A mixture of my two favorite seasons, autumn and spring on the same roll in vivid colors. Isn’t it wonderful? I am truly being energized by the spring, and I hope you too. Go grab a camera and have at least as much fun taking photos as I do right now.
A photographer is never really putting down his camera, no matter what crazy thing she or he is doing for a living or filling the days with. Since we are not living in an ideal world, most of us have to face the limitation of time and availability of light in our everyday life.
But limitations are not necessarily bad things! They teach us to utilize our possibilities more creatively by forcing us to see and think in ways we would normally not choose to. This, of course, influences our work as well as ourselves and vice-versa. Eventually this feedback loop can contribute our personal and photographic development similarly to the way the ever-changing environment influences life forms and pushing them towards evolution.
Currently, my job is to sit in an office and convince computers to obey to the needs of their human masters. Making their lives easier by sending them nice, well formed and most importantly correct invoices. As interesting as it sounds, but it is somewhat fulfilling to my geek side which likes to brain wrestler with abstract problems.
But it makes my photographer side starve because the current situation has a very little room for photography. Especially now when the winter is coming. Days are shorter and shorter, so more and more frequently I end up to spend most of the hours filled with natural light in between walls in my natural working environment.
To overcome this obvious contradiction, I decided to make occasionally a “bring your giant medium format camera to work day“. I started to bug my colleges and taking portraits of them during lunch brakes or when I need to wait for my computer to finish a long-lasting blocking task.
The point is, you don’t need to stop being a photographer, just because the conditions are not ideal for the kind of photography you are normally up to. Try to get out the most of the situation and who knows this might drive you to completely unforeseen paths and discoveries.
Jogi is a musician besides being a software engineer and in my opinion, they are making pretty cool music. Their website http://www.theflamingdugongs.at/ is not complete yet, but worth to have a look at.
Kyrylo was so pleased with his portrait that he visited me at my desk (2 floors below his place) to shake my hands right after I sent it to him.
Naturally, it is not my top priority to photograph at work, and I always make sure that this does not have any effect on my everyday responsibilities. It took me quite a while (about 2 months) to get these images. Though they are not perfect, I enjoyed taking them they are part of my journey.
Sometimes the most amazing places are literally just a few steps from your backyard. Yet it is so easy to overlook or ignore them, just because you don’t expect anything extraordinary close to your regular living space. Or you miss to visit them because you think that since you live nearby, you could do it any time which moment never come. In the end, I tend to know the interesting places around other cities better than my own. But I fight, so last weekend, we visited an amazing sculpture park right next to the place I work. I passed by almost every single workday since last September because my bus stop is about 20 meters from the entrance. Despite the free entrance, I have never managed to take a look, until now. To make the occasion special, I brought my old trusted Pentacon Six Tl loaded with some expired Velvia and my wide angle 50mm Flektagon and the standard 80mm Biometar. Apart from the last picture, all posted photos were taken with the Flektagon. I scanned the film with my CanoScan 9900F.
This piece of land-art (Die Erdkugel als Koffer) is one of our favorites because it integrates so well into its environment and due to the size of it, it is hard to figure out what it supposed to be. Once you get closer and maybe read the attached documentation which is, by the way, the part of the sculpture, you can have a nice AHA experience. It interprets the planet Earth as a suitcase and the statue is the handle.
I have never had any seriously overlapping frames issue with the P6, but this time. Hopefully, it only happened only because of my mistake during film loading.
My advice is to go out and explore your surroundings and don’t forget to take a camera with you.
If you were around Graz and had some spare time, this park is really worth to visit. Here are the layout and the list of all the sculptures.
I have a very special relationship with my Pentacon Six TL camera since it is my only working medium format camera. I was always heavily attracted by medium format photography, but I couldn’t afford for a while to get into it. Eventually, the P6 was the camera which allowed me to shoot 6×6 frames and since then I have not to regret my decision nor had a single thought to change to another system. In this post, I tell my story with this camera and try to show both the bad and the good things about it while hoping that some of you can find this information useful. It will be more like a subtract of my personal user experience and all the important bits I learned during my research.
My Pentacon Six story
I was a student at the university sometime around my second year when I first heard about this camera. I have just started up an experimenting film with an old Zenit-E when my buddy and roommate showed me a website with lots of photos and a description of the P6. Both of us got pretty excited when we realized that there is a world beyond the 35mm film, so we started to google and find more information about this beast. Unfortunately, I had no money at this time to simply buy one on eBay, therefore, I almost abandoned the idea until I found a Pentacon in a repair-shop next to my sister’s old apartment where I helped her to move in. The camera was broken, not complete and had no lens. It was literally a looted old donor of a camera. Despite the conditions of this camera-corpse, I was amazed by the size of the thing. It was huge, much bigger than I have expected after all the photos I have seen on the Internet, especially the lens mount was extraordinary sizeable compare to anything I have seen before. I could only wonder what a hell of a lens could possibly fill this gigantic hole on the front of the camera. From this moment, there was no return. I knew I had to get one of these monsters, but I still had to find the right one, which turned out not to be that difficult at all. A few weeks later I found a little shop in a small village next to my hometown by accident. I had spotted an ancient Russian enlarging machine in the shop-window so I stopped by and found a great repairman and a huge cabinet of precious vintage cameras and other relics. As you have already figured out, he had a nice Pentacon Six TL in the shape I was looking for. The camera was there for cleaning, but the owner hasn’t fetched it for many years. It was not an easy deal because the guy was not really keen to sell anything from his collection, but eventually, I got my Pentacon Six with the standard 80mm f/2.8 Biometar lens made by Carl Zeiss Jena and with a waist level finder. Both the camera and the lens were beautiful, nice, clean and fully operational. In fact, it was not really heavily used and in addition, the repairman was kind enough to check the shutter speeds before he handed the camera over them to me. Since then I have added many additional accessories and lenses to my Pentacon kit so today my collection consists of:
2 Pentacon six bodies
2 Waist level finders
2 Carl Zeiss Jena (CZJ) 80mm f/2.8 Biometar
1 CZJ 50mm f/4 Flektagon
1 CZJ 120mm f/2.8 MC Biometar
1 CZJ 180mm f/2.8 MC Sonar (This lens belongs to a friend I just use it)
1 CZJ 500mm f/5.6 MC Pentacon
Extension tube set
Split image focusing screen
Ever ready cases
The way it looks
Unfortunately, there are not only great things about this camera even if most of the bad rumors are only partially true. So let’s start with the not so nice before we focus on the good things. Many people think that the quality insurance was not the best during the manufacturing of these cameras, therefore, it is a real gamble to buy one as you may get a pretty bad and unreliable one. It is true that it is hard to find a Pentacon Six in a good working condition with perfectly accurate shutter speeds, but it has nothing to do with the quality of the cameras. The fact is that these cameras are pretty old and most of them were used for professional purposes where most likely a tremendous amount of film was burned through of them. You should think of them like you would think about an old car, for instance, a VW Beetle. It is a nice car with very few flaws, but since it is old and was driven around the Equator like 30 times you need to pay attention to maintenance to keep it running. You wouldn’t drive a 40-year-old Beetle found in someone’s backyard without checking the oil level, would you? Of course not, so why would you treat a camera differently? An old mechanical camera is just like an old car. It needs some maintenance and care. Of course, if you were a Hasselblad user, you might disagree, but the category and price tag of these brands are completely different, however, the produced images could be very similar.
Typical issues and solutions
I am lucky because I have personally met with only very few issues you can read on the Internet according to the P6. Most problems are easy to fix during a general overhaul which involves cleaning, lubrication, and adjustments of strings etc.
Slow and inaccurate shutter speeds
The Pentacon Six TL uses a huge canvas focal plane shutter which has 3 implications.
Lenses are cheaper because there is no shutter in the lens
Flash photography is limited to the sync speed which is 1/30s.
The huge canvas needs big and strong strings which can lose their adjustment as time goes by.
Usually, the speed 1/125s is the most accurate, anything faster could be slower than intended if the camera was not used in a long time. The slow times also could be problematic because the mechanical clock could pick up some dust. The solution is an overhaul by someone who knows what he is doing. The camera must be disassembled, cleaned and adjusted. There are no big worries here if you casually use your camera this does not have to be done too often, maybe once in every 10 years.
This problem is much more apparent than the previous one though. Many people have this problem of “kissing” or worse, overlapping frames. I think in most cases this happens because of the improper loose loading of the film. Have a look at this video from PentaconSixExpert on Youtube. I am not saying that this is the only problem because my rolls have uneven spacings between frames too (but no kissing or overlapping so far), but many times it is only because of the way you load the film.
I had no problems with this feature either, but this is definitely one of the weak spots of the camera. I have seen some Pentacons where the back of the camera was modified by adding a little window covered with red plastic to be able to see the numbering at the back of the film. This is certainly a solution, but a very harsh one. You could get the counter fixed by a professional or you could live without it, eventually, you can shoot even if it is broken.
The bright side
Now that we finished off the not so nice things it is time to celebrate and inspect why this system is so great. If I had to be short I would say we need to have a look at the following aspects to justify:
Lenses and image quality
The lens selection for this system is just fantastic in my opinion. You can find excellent optics for literally no money (compared to modern lenses) for every focal length from a wide variety of manufacturers most notably Carl Zeiss Jena (CZJ). The lenses I use most of the time, are generally very fast, sharp and joy to shoot with.
It has to be said that even the multi-coated (MC) versions are more prone to flare than modern lenses with similar optical formula, therefore the use of a lens hood is always a good idea. If you want to read more about compatible lenses, visit the truly great site pentaconsix.com.
A friend of mine gave me a 180mm f/28 Sonnar to use. While this is one of the best and most iconic Pentacon mount lenses, I rarely use it, because it is so much bigger and heavier than the not much shorter 120mm Biometar.
Size and weight
The Pentacon Six looks like a 35mm SLR except this is much bigger, therefore, many people call them beefed up SLR or SLR on steroids. While it is true that they are significantly bigger and heavier than their 35mm counterparts, in fact, the P6 is a rather compact medium format camera which shoots 6x6cm frames. Yes, there are smaller ones, but those usually do not have the capability to switch lenses or having similar dimensions but with more weight. If you, like me love to travel with the biggest “sensor” possible then this size/weight aspect could be really important for you.
It has to be said, that this kit could be still awfully heavy especially if you pack more than one lens and a tripod too.
Value for the money
I think the Pentacon Six system comes with a very appealing price nowadays. You can get your body with an excellent standard lens around 100€ and even if you add the extra for cleaning and adjustments it is still far cheaper than most other interchangeable lens medium format system.
The fun I have
Eszter documented how I took a portrait of a painter in Istanbul. I think it reflects my emotions during the usage of this camera.
During the years I used my Pentacon Six, I have gained a lot of experience with it. So I would like to share some random thoughts I think could be useful for you.
Pentaprism vs Waist level finder
I do have a TTL prism, which provides a correct image in the finder (no switched sides) and can be used for through the lens light readings.
On the other hand, the prism is very dark and the light metering is not very easy to use. It is great to have in some cases, but generally, I prefer an external light meter. There are different brighter prisms available for example the older non-metering version. If I am not wrong the even brighter prism of the Kiev 60 is also compatible and can be attached.
In contrast, the waist level finder is definitely the brightest solution, therefore I use it the most. But it switches the sides of the images in the viewfinder, and you can hold the camera lower than usual to be able to see through the finder. For me, it is much easier to focus with, especially with the little magnifying glass built in.
Despite all of the inconveniences of the waist level finder, the image in it is something really special. I know it is an oxymoron, but it looks even better than reality. It is huge, bright and vivid, no viewfinder of any 35mm camera can come even close to it.
Focusing as always is a critical thing to do when talking about any photography. I had to learn that the depth of field is just way more shallow when you shoot medium format, thus even a slight movement of the camera could cause your subject to fall out of the sharp region.
When I shoot handheld with the 80mm/120mm lenses I try to not going wider than f/4 or even f/5.6 because it still provides nice bokeh, but has some safety in terms of the size of the sharp areas. Naturally, I often find myself shooting wide open (f/2.8) on a street, but it’s always risky to do.
Luckily I haven’t had many problems with my cameras, but during the last 6 years, I had some cases where I had to ask someone to help.
I had “the old” (my original) P6 cleaned, lubricated and adjusted one time after I heard some unusual noises from the shutter. Since then it works perfectly. No exposure problems even when shooting Velvia.
My 120mm lens had a stuck iris once which required the disassembly and general cleaning of the lens. This is, unfortunately, a common problem with old lenses. Conclusion and recommendation
Needless to say, this camera is not for everyone. As long as you can accept that your camera needs some care in a form of regular maintenance, you could be very happy with it. So keep in mind that the final price could be higher than the purchase itself as basic repairs might be needed.
Nowadays it is not always easy to find someone who is qualified to repair old mechanical cameras. Therefore it is best to buy from a trusted source with grantee that you get a working camera. I think it worth the extra money to get an overhauled camera in the first place.
I think this is a great camera, and could be a good choice for anyone who wants to try medium format photography and needs an interchangeable lens solution. If you don’t have the budget for more expensive systems like Hasselblad or Mamiya, or simply want to find the most compact option this could be the solution for you.
So far my Pentacon Six never let me down, the images are just amazing and for me, it is great fun to shoot with.
The Pentacon Six System Far the best and most comprehensive informational site about the topic. Highly recommended.
Finally, I am back with a post again! It has been a long time I could write anything. The reason for this long break is that I have got married plus I have changed job and country to live. From September I will live in Austria and I hope I will find new impulses for my photography.
Anyway, thanks to my old mentor and friend PepLluis that we could visit a really extraordinary place (Istanbul) as our honeymoon. This post is a kind of diary about this trip taken by my beloved Pentacon Six TL camera. Although we have carried a digital camera as well the medium format is one of my weak points and so I decided to share these images over the digital.
Pentacon Six as a travel camera
Of course, a big question has immediately emerged when we hit the warm and crowded streets of Istanbul with a heavy duty medium format camera and with three lenses and a tripod in the backpack. As you would suggest this gear is anything but light, so the question is how good travel camera is the Pentacon Six TL especially nowadays when you can choose among many excellent lightweight digital system cameras.
This gear is indeed heavy and cumbersome to use. You need to measure light in advance, focus carefully (the depth of field is really shallow on greater apertures) and you must hold the camera very still when firing the shutter. These tasks can be difficult in the crowd you can experience in the touristic places of Istanbul during Ramadan. I definitely gained some muscles after this trip.
On the other hand, the experience of operating such a beast is really unique as well as the results you can get at home. Personally, I am really pleased with the images and it was a great fun to use the P6. But next time I will think my camera choice over before packing. Nevertheless, I am pretty sure that the Pentagon will come with me many more times. My Pentacon Six TL review can be seen here.
My last post about portraits (Portraits round 1) featured black and white photographs. Black and white often help simplify things by skipping the colors and thus resulting in a cleaner image focused more on geometry, composition, and effects of light and shadows. Many times this monochromatic approach emphasizes important properties which would have been otherwise overwhelmed by the chaotic world of colors and can be greatly beneficial. While I love the more abstract nature of the B&W images, I also admire the emotional power of the colors. Sometimes a photo just works better in color.
I am quite fed up with the long, cold and dark winter here so now I am starting to see and use some colors. Besides this post is a post about portraiture it is a small celebration of colors hoping that spring will come soon.
Unfortunately, I had less time to take pictures recently, therefore this selection is composed of my old works exclusively. The photos are taken in many different locations and seasons using various films and lenses but with the same old Pentacon Six of mine.
Color negative film
If you want to take portraits in color, negative film is probably the best choice. It is usually less prone to exposure issues than positive (dia) film so it can accept slight over or underexposure without serious problems on the final image. Also, these films are not as contrasty and vivid as most positive films (except Kodak Ektar which I have never tried so far) so the images are smoother and it is often a good point in the case of general portraits.
It is also very easy to make black and white images out of a color version so you have the flexibility to change your mind during post-processing.
Color positive (dia) film
Positive films are generally recommended for natural product and architectural shoots. At least this is what I have heard a lot. But of course many uses dia film for portraits as well. For example, the famous photographer Steve McCurry used to shoot on positive film and took fabulous portraits like the Afghan Girl.
I personally like to use these films for portraits because of the character and the fact that they have the finest grain ever. But this is true that lights and shadows have more contrast, the exposure must be bloody accurate and overall you have to be very precise to achieve a good result. In addition, it is not too easy to find a lab where you can get it developed especially if you shoot medium format or bigger.
At the bottom line, I think it is still worth to shoot positive films regardless of the subject because the view of the developed dia film makes you happy as a kid at Christmas for sure. You get the final (not inverted) image. Because it gets visible by the light passing through the film rather than reflecting it. That is why dia has a huge dynamic range which makes the experience (in my opinion) kind of better than reality.
Portraiture is a very exciting branch of photography probably because of its subject. It is indeed a very ancient and natural thing to depict our fellowman. Therefore an enormous amount of portraits has been created over history and especially nowadays.
Most likely this is the reason why portraiture is not easy to do well, fortunately, all of us genetically attracted to faces. People are hard-coded to recognize human faces virtually everywhere and in anything even if there are only a few random craters and some shadows on the surface of a dead planet.
I also do love good portraits, and I am generally taking a lot as well. Unfortunately, I am not as good as I wish to be.
It is rather hard to catch the moment of emotion in the right composition among proper lights to get a really special portrait. In addition, as it is an interactive process you have to be connected to the other human-being on a level which is challenging and exciting at the same time.
This is overall very rewarding for me and I am going to keep shooting portraits for sure, hopefully on a higher and higher level.
I was planning to post some of my portraits here for a long time ago, but on the other hand, I decided to push myself to publish new works as much as possible.
Finally, the time has come and I have developed a few rolls of film a few days ago. So now I have some new photos which I will mix up with a few not so new ones.
The recent shoots caused a quite a bit of excitement because as always everything was experimental. I have tested a new focusing screen in my Pentacon Six as well as 2 new types of film (Fuji Across 100, Lomo Lady Gray 400) and this was the first time I used Kodak D76 developer.
It turned out all good, however, there were lessons to learn again.
Some new shoots
Some not so new shoots
These two pictures were among those I shoot on my first few rolls and developed myself around 2007-2008. The guy was my roommate during the university and these were taken in our kitchen next to a big window.
By the way, he is also a photographer and shooting film too from time to time. He is the founder of a really nice blog called 100ASA.
Naturally there are many more portraits in my collection which deserve a frame in this blog and certainly many will show up. I only need to find the occasion and the context to merge them with recent works and publish. But hey this is only the round 1. I hope some of these cached your eye.